BUILD YOUR OWN GANGSHEET

PLEASE NOTE: A commercial heat press is recommended to press these DTF Transfers as it requires precise temperature control and evenly distributed heavy preassure that cannot be achieved with an easypress or home iron. 

Important Guides:

Please upload your PNG image(s) with a transparent background only. We suggest 300 DPI for the best quality DTF prints. The gangsheet builder will have a built in indicator to tell you if your image resolution is good quality to print. We will not be held liable for poor resolution images and will not be responsible for reprinting artwork that are pixelated. Please be advised printed transfer colors can vary slightly on the monitor due to computer settings.

Current Turnaround Time:

DTF gangsheets/single sheets currently have a 1-2 day turnaround time.  

DTF Pressing Instructions: 

Please make sure you are using the correct settings prior to pressing your transfer.

Recommended Temperature: 300°-315°F (Different heat presses will always vary!)

Set for Heavy Pressure.

Pre-press garment for 7 seconds to remove moisture.

Press Time: 15 seconds

Hot Peel

Using Teflon Sheet - Press again for 10 seconds

If the transfer does not stick, put the transfer paper back down, and press for a few more seconds. Transfers not sticking are usually due to uneven heating, not enough pressure, or not pressed long enough.

Questions and Concerns:

For any questions, please e-mail wildcherryshop@yahoo.com directly.